MAX1231ACEG+T vs MAX1231ACEG+ Comparaison
Comparaison détaillée côte à côte de MAX1231ACEG+T par Analog Devices et MAX1231ACEG+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX1231ACEG+ - 12-Bit 300ksps 16-Ch SAR ADC | Maxim Integrated
MAX1231ACEG+ ✓ ActifComparaison des spécifications
| Paramètre | MAX1231ACEG+T | MAX1231ACEG+ |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,65 | $6,37 |
| Résolution | 12 bit | 12 bit |
| Fréquence d'échantillonnage | 300 ksps | — |
| Number of Input Channels | 8 or 16 single-ended (4 or 8 differential) | 8 / 16 (selectable) |
| Architecture | SAR (Successive Approximation Register) | — |
| Input Type | Single-Ended / Differential (software configurable) | — |
| Data Interface | SPI / QSPI / MICROWIRE-compatible serial | — |
| Tension d'alimentation | 3 V or 3.3 V nominal | — |
| Supply Current (operating, 300 ksps) | 1.6 mA (typ) | — |
| Internal Reference Voltage | 2.5 V (A-grade) | — |
| External Reference Range | 1.0 V to VDD | 1.0 V to AVDD |
| Plage de tension d'entrée | 0 to VREF / ±VREF / 0 to 2×VREF / ±2×VREF | — |
| Internal FIFO | 16 entries | — |
| Internal Temperature Sensor Accuracy | ±1 °C | — |
| Linearity Error (INL) | ±1 LSB (max) | — |
| Plage de température de fonctionnement | 0 °C to +70 °C (commercial, C-grade) | 0 °C to +70 °C (commercial, C grade) |
| Boîtier | 24-pin QSOP | 24-QSOP (EG) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Sample Rate | — | 300 ksps |
| Input Configuration | — | Single-ended / pseudo-differential |
| Conversion Architecture | — | SAR (Successive Approximation) |
| Analog Supply Voltage (AVDD) | — | 3.0 V to 3.6 V |
| Digital Supply Voltage (DVDD) | — | 2.7 V to VAVDD |
| Courant d'alimentation | — | [DATA_NEEDED: AVDD + DVDD current] |
| Internal Reference | — | 2.5 V |
| Integral Nonlinearity (INL) | — | ±1 LSB (max) |
| Differential Nonlinearity (DNL) | — | ±1 LSB (max, no missing codes) |
| Signal-to-Noise + Distortion (SINAD) | — | [DATA_NEEDED: SINAD at 100 kHz input] |
| Internal FIFO Depth | — | 16 conversions |
| Capteur de température interne | — | Yes (±1 °C typical accuracy) |
| Serial Interface | — | SPI / QSPI / MICROWIRE-compatible |
| Maximum SCLK Frequency | — | 10 MHz |
| Input Fault Tolerance | — | ±6 V (clamped, no latch-up) |
| MSL Sensitivity Level | — | [DATA_NEEDED: MSL level] |