MAX1231ACEG+T vs MAX1231ACEG+ 比較
詳細な並列比較: MAX1231ACEG+T メーカー: Analog Devices および MAX1231ACEG+ メーカー: Maxim Integrated。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MAX1231ACEG+T | MAX1231ACEG+ |
|---|---|---|
| ブランド | Analog Devices | Maxim Integrated |
| カテゴリ | ADC/DAC | ADC/DAC |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $4.65 | $6.37 |
| 分解能 | 12 bit | 12 bit |
| サンプリングレート | 300 ksps | — |
| Number of Input Channels | 8 or 16 single-ended (4 or 8 differential) | 8 / 16 (selectable) |
| Architecture | SAR (Successive Approximation Register) | — |
| Input Type | Single-Ended / Differential (software configurable) | — |
| Data Interface | SPI / QSPI / MICROWIRE-compatible serial | — |
| 電源電圧 | 3 V or 3.3 V nominal | — |
| Supply Current (operating, 300 ksps) | 1.6 mA (typ) | — |
| Internal Reference Voltage | 2.5 V (A-grade) | — |
| External Reference Range | 1.0 V to VDD | 1.0 V to AVDD |
| 入力電圧範囲 | 0 to VREF / ±VREF / 0 to 2×VREF / ±2×VREF | — |
| Internal FIFO | 16 entries | — |
| Internal Temperature Sensor Accuracy | ±1 °C | — |
| Linearity Error (INL) | ±1 LSB (max) | — |
| 動作温度範囲 | 0 °C to +70 °C (commercial, C-grade) | 0 °C to +70 °C (commercial, C grade) |
| パッケージ | 24-pin QSOP | 24-QSOP (EG) |
| 実装タイプ | Surface Mount | Surface Mount |
| RoHS ステータス | Compliant | Compliant |
| Sample Rate | — | 300 ksps |
| Input Configuration | — | Single-ended / pseudo-differential |
| Conversion Architecture | — | SAR (Successive Approximation) |
| Analog Supply Voltage (AVDD) | — | 3.0 V to 3.6 V |
| Digital Supply Voltage (DVDD) | — | 2.7 V to VAVDD |
| 電源電流 | — | [DATA_NEEDED: AVDD + DVDD current] |
| Internal Reference | — | 2.5 V |
| Integral Nonlinearity (INL) | — | ±1 LSB (max) |
| Differential Nonlinearity (DNL) | — | ±1 LSB (max, no missing codes) |
| Signal-to-Noise + Distortion (SINAD) | — | [DATA_NEEDED: SINAD at 100 kHz input] |
| Internal FIFO Depth | — | 16 conversions |
| 内部温度センサ | — | Yes (±1 °C typical accuracy) |
| Serial Interface | — | SPI / QSPI / MICROWIRE-compatible |
| Maximum SCLK Frequency | — | 10 MHz |
| Input Fault Tolerance | — | ±6 V (clamped, no latch-up) |
| MSL Sensitivity Level | — | [DATA_NEEDED: MSL level] |