MAX150BEPP vs ADC0804LCN Comparaison
Comparaison détaillée côte à côte de MAX150BEPP par Maxim Integrated et ADC0804LCN par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX150BEPP | ADC0804LCN |
|---|---|---|
| Marque | Maxim Integrated | Texas Instruments |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $17,40 | $3,84 |
| Résolution | 8 bit | 8 bit |
| Number of Input Channels | 1 | — |
| Conversion Architecture | Half-flash (2-step flash) | — |
| Conversion Time (Typical) | 1.3 us | — |
| Analog Supply Voltage | +5 V | 4.5 V to 6.5 V (single +5 V typical) |
| Analog Input Range | 0 V to +5 V | — |
| Integral Nonlinearity (INL) | ±1 LSB (max) | — |
| Differential Nonlinearity (DNL) | ±1 LSB (max) | — |
| Internal Reference Voltage | 2.5 V (bandgap) | — |
| Reference Accuracy | [DATA_NEEDED: ±% at 25C] | — |
| Track-and-Hold Acquisition | Internal (wideband) | — |
| Data Output Interface | Parallel, 8-bit, three-state | — |
| Power Dissipation | [DATA_NEEDED: mW at full operation] | — |
| Température de fonctionnement | 0 C to +70 C (E grade) | -40 °C to +85 °C |
| Boîtier | 20-pin PDIP (PDIP-20) | 20-pin PDIP (N) |
| Type de montage | Through-Hole (DIP) | Through-hole |
| Statut RoHS | Depends on suffix — MAX150BEPP (non-RoHS) / MAX150BEPP+ (RoHS) | [DATA_NEEDED: RoHS status of LCN variant] |
| Family Member Variants | MAX150AEPP (-40 to +85C), MAX150BCPP (full -40 to +85C) | — |
| Number of Channels | — | 1 |
| Input Type | — | Differential (single-ended capable) |
| Converter Architecture | — | SAR (Successive Approximation) |
| Digital Supply Voltage | — | Same as VCC (no separate DVCC) |
| Full-Scale Input Range | — | 0 V to 5 V (with VREF/2 = 2.5 V) |
| Reference Input | — | VREF/2 pin, sets full-scale span |
| INL (Non-linéarité intégrale) | — | ±1 LSB (max) |
| DNL (Differential Nonlinearity) | — | ±1 LSB (max) |
| Conversion Time | — | 110 µs typical at fCLK = 640 kHz |
| Conversion Rate | — | Up to ~10 kSPS (typical application clock) |
| Supply Current (ICC) | — | 1.9 mA typ at 25 °C, CS=5V (LCN/LCWM) |
| Digital Interface | — | Three-state parallel bus, RD/WR strobes, CS |
| On-Chip Clock Generator | — | Yes (external R or R + C) |
| Niveau MSL | — | [DATA_NEEDED: MSL level] |