MAX202CPE+ vs MAX202CD Comparaison
Comparaison détaillée côte à côte de MAX202CPE+ par Analog Devices et MAX202CD par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX202CPE+ - +5V RS-232 Transceiver, 2 Drivers/2 Receivers | Maxim Integrated
MAX202CPE+ ✓ Actif
Comparaison des spécifications
| Paramètre | MAX202CPE+ | MAX202CD |
|---|---|---|
| Marque | Analog Devices | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,55 | $1,18 |
| Fonction | RS-232 Transceiver (2 Drivers / 2 Receivers) | — |
| Débit de données | 120 kbps (min) | [DATA_NEEDED: maximum data rate] |
| Tension d'alimentation | +4.5 V to +5.5 V | — |
| Supply Current (no load) | 15 mA (typ) | — |
| External Capacitors | 4 x 0.1 uF | — |
| Driver Output Voltage Swing | +/-5 V EIA/TIA-232E compliant | — |
| Receiver Input Voltage Range | +/-25 V | — |
| Receiver Hysteresis | 0.5 V (typ) | — |
| ESD Protection (RS-232 pins) | 15 kV HBM (per Maxim datasheet) | — |
| Plage de température de fonctionnement | 0 C to +70 C (commercial) | — |
| Boîtier | 16-PDIP (through-hole, 0.300 inch / 7.62 mm row spacing) | 16-pin SOIC |
| Type de montage | Through-Hole (THT) | Surface mount |
| Drivers per Package | 2 | — |
| Receivers per Package | 2 | — |
| Duplex | Full Duplex | — |
| Statut RoHS | Compliant (Pb-free '+' suffix) | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | Lead-Free (Pb-free finish, '+' suffix) | — |
| Product Type | — | Dual RS-232 line driver and receiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| Channel Configuration | — | 2 drivers and 2 receivers |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |