MAX202CPE+ vs MAX202CD 비교
다음의 상세 나란히 비교: MAX202CPE+ 제조: Analog Devices 및 MAX202CD 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
MAX202CPE+ - +5V RS-232 Transceiver, 2 Drivers/2 Receivers | Maxim Integrated
MAX202CPE+ ✓ 활성
사양 비교
| 파라미터 | MAX202CPE+ | MAX202CD |
|---|---|---|
| 브랜드 | Analog Devices | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $3.55 | $1.18 |
| 기능 | RS-232 Transceiver (2 Drivers / 2 Receivers) | — |
| 데이터 속도 | 120 kbps (min) | [DATA_NEEDED: maximum data rate] |
| 공급 전압 | +4.5 V to +5.5 V | — |
| Supply Current (no load) | 15 mA (typ) | — |
| External Capacitors | 4 x 0.1 uF | — |
| Driver Output Voltage Swing | +/-5 V EIA/TIA-232E compliant | — |
| Receiver Input Voltage Range | +/-25 V | — |
| Receiver Hysteresis | 0.5 V (typ) | — |
| ESD Protection (RS-232 pins) | 15 kV HBM (per Maxim datasheet) | — |
| 동작 온도 범위 | 0 C to +70 C (commercial) | — |
| 패키지 | 16-PDIP (through-hole, 0.300 inch / 7.62 mm row spacing) | 16-pin SOIC |
| 실장 유형 | Through-Hole (THT) | Surface mount |
| Drivers per Package | 2 | — |
| Receivers per Package | 2 | — |
| Duplex | Full Duplex | — |
| RoHS 상태 | Compliant (Pb-free '+' suffix) | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | Lead-Free (Pb-free finish, '+' suffix) | — |
| Product Type | — | Dual RS-232 line driver and receiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| ESD Protection | — | ±15 kV pin-to-pin on serial-port connection pins, including ground |
| RS-232 Standard | — | TIA/EIA-232-F |
| Interface Function | — | Electrical interface between asynchronous communication controller and serial-port connector |
| Charge-Pump Circuit | — | Dual charge-pump circuit |
| Channel Configuration | — | 2 drivers and 2 receivers |
| 동작 온도 | — | [DATA_NEEDED: operating temperature range] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| Driver Output Voltage | — | [DATA_NEEDED: RS-232 driver output voltage] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver input threshold] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |