MAX232ECDWR vs ADM232LAR Comparaison
Comparaison détaillée côte à côte de MAX232ECDWR par Texas Instruments et ADM232LAR par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX232ECDWR - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX232ECDWR ✓ ActifComparaison des spécifications
| Paramètre | MAX232ECDWR | ADM232LAR |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Dual RS-232 driver/receiver | — |
| Number of Transmitters | 2 | — |
| Number of Receivers | 2 | — |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Supply Type | Single 5 V supply | — |
| ESD Protection Standard | IEC 61000-4-2 | — |
| Boîtier | 16-pin SOIC (DW), 0.295 inch / 7.50 mm width | 16-lead SOIC (SOIC-16) |
| Type de montage | Surface mount | Surface Mount |
| Transmitter Output Type | RS-232 line driver | — |
| Receiver Output Type | TTL/CMOS logic-level receiver | — |
| Charge-Pump Architecture | Capacitive voltage generator with external capacitors | — |
| Number of External Charge-Pump Capacitors | 4 | — |
| Bypass Capacitor Connection | 1 external capacitor pin | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Logic Levels | [DATA_NEEDED: receiver input logic thresholds] | — |
| RS-232 Common-Mode Voltage Range | [DATA_NEEDED: RS-232 common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: driver output current] |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Tension d'alimentation | — | 5 V (single supply) |
| Transceiver Configuration | — | 2 drivers / 2 receivers (2/2) |
| Débit de données | — | 120 kB/s |
| Interface Standard Compliance | — | EIA-232-E and V.28 |
| Output Swing | — | 9 V with 5 V supply |
| On-Board DC-DC Converters | — | Yes |
| Required External Capacitors | — | 1 uF |
| Shutdown | — | Low power shutdown mode |
| Receiver Supply Current in Shutdown | — | 1 uA (receivers active in shutdown) |
| Receiver Input Voltage Tolerance | — | 30 V |
| Nombre de broches | — | 16 |
| Technology | — | CMOS |
| Automotive Qualification (AEC-Q100) | — | not_applicable |
| Courant d'alimentation | — | [DATA_NEEDED: typical and maximum supply current] |
| Statut RoHS | — | [DATA_NEEDED: RoHS status for ADM232LAR] |
| REACH Status | — | [DATA_NEEDED: REACH status for ADM232LAR] |