MAX232ECDWR vs ADM232LAR Comparação
Comparação detalhada lado a lado de MAX232ECDWR por Texas Instruments e ADM232LAR por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
MAX232ECDWR - Dual 250kbps RS-232 Transceiver | Texas Instruments
MAX232ECDWR ✓ AtivoComparação de especificações
| Parâmetro | MAX232ECDWR | ADM232LAR |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Dual RS-232 driver/receiver | — |
| Number of Transmitters | 2 | — |
| Number of Receivers | 2 | — |
| Maximum Data Rate | 250 kbps | — |
| Supply Voltage Range | 4.5 V to 5.5 V | — |
| Supply Type | Single 5 V supply | — |
| ESD Protection Standard | IEC 61000-4-2 | — |
| Encapsulamento | 16-pin SOIC (DW), 0.295 inch / 7.50 mm width | 16-lead SOIC (SOIC-16) |
| Tipo de montagem | Surface mount | Surface Mount |
| Transmitter Output Type | RS-232 line driver | — |
| Receiver Output Type | TTL/CMOS logic-level receiver | — |
| Charge-Pump Architecture | Capacitive voltage generator with external capacitors | — |
| Number of External Charge-Pump Capacitors | 4 | — |
| Bypass Capacitor Connection | 1 external capacitor pin | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Logic Levels | [DATA_NEEDED: receiver input logic thresholds] | — |
| RS-232 Common-Mode Voltage Range | [DATA_NEEDED: RS-232 common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: driver output current] |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Tensão de alimentação | — | 5 V (single supply) |
| Transceiver Configuration | — | 2 drivers / 2 receivers (2/2) |
| Taxa de dados | — | 120 kB/s |
| Interface Standard Compliance | — | EIA-232-E and V.28 |
| Output Swing | — | 9 V with 5 V supply |
| On-Board DC-DC Converters | — | Yes |
| Required External Capacitors | — | 1 uF |
| Shutdown | — | Low power shutdown mode |
| Receiver Supply Current in Shutdown | — | 1 uA (receivers active in shutdown) |
| Receiver Input Voltage Tolerance | — | 30 V |
| Número de pinos | — | 16 |
| Technology | — | CMOS |
| Automotive Qualification (AEC-Q100) | — | not_applicable |
| Corrente de alimentação | — | [DATA_NEEDED: typical and maximum supply current] |
| Status RoHS | — | [DATA_NEEDED: RoHS status for ADM232LAR] |
| REACH Status | — | [DATA_NEEDED: REACH status for ADM232LAR] |