MAX3232EIPWR vs MAX3232IPWR Comparaison
Comparaison détaillée côte à côte de MAX3232EIPWR par Texas Instruments et MAX3232IPWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX3232EIPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3232EIPWR ✓ ActifTexas Instruments
MAX3232IPWR - 250kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3232IPWR ✓ ActifComparaison des spécifications
| Paramètre | MAX3232EIPWR | MAX3232IPWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Dual RS-232 line driver/receiver with dual charge pump | — |
| Number of Transmit Channels | 2 channels | — |
| Number of Receive Channels | 2 channels | — |
| Supply Voltage Range | 3 V to 5.5 V | 3V to 5.5V |
| Maximum Data Rate | 250 kbps | 250kbit/s |
| ESD Protection | ±15 kV IEC ESD, pin-to-pin | ±15kV |
| RS-232 Compliance | TIA/EIA-232-F | — |
| Interface Direction | Full duplex | — |
| Boîtier | 16-pin TSSOP | 16-pin TSSOP |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Input Logic Voltage | [DATA_NEEDED: input logic voltage threshold] | — |
| Output Logic Voltage | [DATA_NEEDED: output logic voltage level] | — |
| Driver Output Swing | [DATA_NEEDED: RS-232 output swing] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Charge-Pump Capacitors | [DATA_NEEDED: recommended charge-pump capacitance] | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | Dual RS-232 line driver and receiver |
| Number of Drivers | — | 2 channels |
| Number of Receivers | — | 2 channels |
| Logic Input Compatibility | — | 5V logic |
| Charge-Pump External Capacitors | — | 0.1µF |
| Typical Supply Current | — | 300µA |
| RS-232 Standards | — | TIA/EIA-232-F and ITU V.28 |
| Channel Configuration | — | 2/2 transceiver |
| Supply Topology | — | Single 3V to 5.5V supply |
| ESD Protection Scope | — | Serial-port connection terminals, including ground |