MAX3232EIPWR vs MAX3232IPWR तुलना

विस्तृत दोनों ओर की तुलना MAX3232EIPWR द्वारा Texas Instruments और MAX3232IPWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
MAX3232EIPWR MAX3232EIPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX3232EIPWR - 250kbps RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX3232EIPWR ✓ सक्रिय
Texas Instruments
MAX3232IPWR MAX3232IPWR - 250kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX3232IPWR - 250kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)

MAX3232IPWR ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX3232EIPWR MAX3232IPWR
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type Dual RS-232 line driver/receiver with dual charge pump —
Number of Transmit Channels 2 channels —
Number of Receive Channels 2 channels —
Supply Voltage Range 3 V to 5.5 V 3V to 5.5V
Maximum Data Rate 250 kbps 250kbit/s
ESD Protection ±15 kV IEC ESD, pin-to-pin ±15kV
RS-232 Compliance TIA/EIA-232-F —
Interface Direction Full duplex —
पैकेज 16-pin TSSOP 16-pin TSSOP
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई करंट [DATA_NEEDED: supply current] —
Input Logic Voltage [DATA_NEEDED: input logic voltage threshold] —
Output Logic Voltage [DATA_NEEDED: output logic voltage level] —
Driver Output Swing [DATA_NEEDED: RS-232 output swing] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Charge-Pump Capacitors [DATA_NEEDED: recommended charge-pump capacitance] —
RoHS स्थिति unknown [DATA_NEEDED: RoHS status]
REACH Status unknown [DATA_NEEDED: REACH status]
AEC-Q100 Qualification not_applicable —
Product Type — Dual RS-232 line driver and receiver
Number of Drivers — 2 channels
Number of Receivers — 2 channels
Logic Input Compatibility — 5V logic
Charge-Pump External Capacitors — 0.1µF
Typical Supply Current — 300µA
RS-232 Standards — TIA/EIA-232-F and ITU V.28
Channel Configuration — 2/2 transceiver
Supply Topology — Single 3V to 5.5V supply
ESD Protection Scope — Serial-port connection terminals, including ground

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध