MAX339CSE+ vs MAX338CSE+T Comparaison

Comparaison détaillée côte à côte de MAX339CSE+ par Analog Devices et MAX338CSE+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX338CSE+T MAX338CSE+T - 8:1 CMOS Multiplexer | Analog Devices

MAX338CSE+T - 8:1 CMOS Multiplexer | Analog Devices

MAX338CSE+T ✓ Actif

Comparaison des spécifications

Paramètre MAX339CSE+ MAX338CSE+T
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Multiplexer Configuration Dual 4:1 8:1
Total Channels 8 —
Architecture CMOS analog multiplexer —
On-Resistance 650 ohms maximum —
Single-Supply Voltage Range 4.5 V to 30 V —
Dual-Supply Voltage Range ±4.5 V to ±20 V —
Control Input Compatibility TTL compatible —
Control Input Logic Range 0.8 V to 2.4 V —
Address Inputs per Multiplexer 2 binary inputs —
Enable Inputs Active-low control inputs —
Boîtier 16-pin NSOIC 16-pin narrow SOIC
Type de montage Surface mount Surface mount
Process Technology 44 V silicon-gate CMOS process 44 V silicon-gate CMOS process
Operating Mode Multiplexer or demultiplexer —
Leakage Current [DATA_NEEDED: leakage current] —
On-Time [DATA_NEEDED: on-time] —
Off-Time [DATA_NEEDED: off-time] —
Charge Injection [DATA_NEEDED: charge injection] [DATA_NEEDED: charge injection]
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
Number of Circuits — 1 circuit
Number of Channels — 8 channels
Maximum On-Resistance — 400 ohm
Single-Supply Operating Range — +4.5 V to +30 V
Dual-Supply Operating Range — ±4.5 V to ±20 V
TTL Input Logic High — +0.8 V to +2.4 V
Switch Type — CMOS analog multiplexer
Signal Direction — Bidirectional conduction
Channel Leakage Current — [DATA_NEEDED: channel leakage current]
Off-Isolation — [DATA_NEEDED: off-isolation]
Enable Control — [DATA_NEEDED: enable control configuration]
Standard Reel Quantity — [DATA_NEEDED: standard reel quantity]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis