MAX339CSE+ vs MAX338CSE+T तुलना

विस्तृत दोनों ओर की तुलना MAX339CSE+ द्वारा Analog Devices और MAX338CSE+T द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX339CSE+ MAX339CSE+ - Dual 4:1 Low-Leakage Analog Multiplexer | Analog Devices

MAX339CSE+ - Dual 4:1 Low-Leakage Analog Multiplexer | Analog Devices

MAX339CSE+ ✓ सक्रिय
Analog Devices
MAX338CSE+T MAX338CSE+T - 8:1 CMOS Multiplexer | Analog Devices

MAX338CSE+T - 8:1 CMOS Multiplexer | Analog Devices

MAX338CSE+T ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX339CSE+ MAX338CSE+T
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Multiplexer Configuration Dual 4:1 8:1
Total Channels 8 —
Architecture CMOS analog multiplexer —
On-Resistance 650 ohms maximum —
Single-Supply Voltage Range 4.5 V to 30 V —
Dual-Supply Voltage Range ±4.5 V to ±20 V —
Control Input Compatibility TTL compatible —
Control Input Logic Range 0.8 V to 2.4 V —
Address Inputs per Multiplexer 2 binary inputs —
Enable Inputs Active-low control inputs —
पैकेज 16-pin NSOIC 16-pin narrow SOIC
माउंटिंग प्रकार Surface mount Surface mount
Process Technology 44 V silicon-gate CMOS process 44 V silicon-gate CMOS process
Operating Mode Multiplexer or demultiplexer —
Leakage Current [DATA_NEEDED: leakage current] —
On-Time [DATA_NEEDED: on-time] —
Off-Time [DATA_NEEDED: off-time] —
Charge Injection [DATA_NEEDED: charge injection] [DATA_NEEDED: charge injection]
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
Number of Circuits — 1 circuit
Number of Channels — 8 channels
Maximum On-Resistance — 400 ohm
Single-Supply Operating Range — +4.5 V to +30 V
Dual-Supply Operating Range — ±4.5 V to ±20 V
TTL Input Logic High — +0.8 V to +2.4 V
Switch Type — CMOS analog multiplexer
Signal Direction — Bidirectional conduction
Channel Leakage Current — [DATA_NEEDED: channel leakage current]
Off-Isolation — [DATA_NEEDED: off-isolation]
Enable Control — [DATA_NEEDED: enable control configuration]
Standard Reel Quantity — [DATA_NEEDED: standard reel quantity]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध