MAX3483EESA+T vs MAX3483ESA+ Comparaison

Comparaison détaillée côte à côte de MAX3483EESA+T par Analog Devices et MAX3483ESA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ Actif

Comparaison des spécifications

Paramètre MAX3483EESA+T MAX3483ESA+
Marque Analog Devices Maxim Integrated
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Transceiver Configuration 1 driver and 1 receiver —
Tension d'alimentation 3.3 V 3.3 V
Tension d'alimentation de fonctionnement 3 V to 3.6 V —
Maximum Data Rate 12 Mbps 10 Mbps
ESD Protection ±15 kV [DATA_NEEDED: ESD protection rating for MAX3483ESA+]
Driver Type Slew-rate-limited true driver —
Supported Standards RS-485 and RS-422 —
Duplex Mode Half-duplex Half-duplex
Boîtier 8-pin NSOIC 8-SOIC
Nombre de broches 8 pins —
Type de montage Surface mount Surface mount
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Verified Supply Range — 3 V to 3.6 V
Driver and Receiver Count — 1 driver and 1 receiver
Interface Standards — RS-485 and RS-422
Driver Architecture — Slew-rate limited
EMI Control — Slew-rate limitation reduces EMI and reflections
Low-Speed Error-Free Transmission — Up to 250 kbps
Power Architecture — 3.3V-powered, low-power transceiver
Operating Voltage — 3 V to 3.6 V
Receiver Output Type — [DATA_NEEDED: receiver output type]
Termination Requirement — [DATA_NEEDED: termination and biasing details]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis