MAX3483EESA+T vs MAX3483ESA+ So sánh
So sánh chi tiết song song của MAX3483EESA+T bằng Analog Devices và MAX3483ESA+ bằng Maxim Integrated. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
MAX3483EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+T ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX3483EESA+T | MAX3483ESA+ |
|---|---|---|
| Thương hiệu | Analog Devices | Maxim Integrated |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| Điện áp cung cấp | 3.3 V | 3.3 V |
| Điện áp cung cấp hoạt động | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] |
| Driver Type | Slew-rate-limited true driver | — |
| Supported Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| Hộp | 8-pin NSOIC | 8-SOIC |
| Số chân | 8 pins | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Điện áp cung cấp | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Verified Supply Range | — | 3 V to 3.6 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Interface Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| EMI Control | — | Slew-rate limitation reduces EMI and reflections |
| Low-Speed Error-Free Transmission | — | Up to 250 kbps |
| Power Architecture | — | 3.3V-powered, low-power transceiver |
| Operating Voltage | — | 3 V to 3.6 V |
| Receiver Output Type | — | [DATA_NEEDED: receiver output type] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing details] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |