MAX3483ESA+T vs MAX3483EESA+T Comparaison
Comparaison détaillée côte à côte de MAX3483ESA+T par Analog Devices et MAX3483EESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3483EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+T ✓ ActifComparaison des spécifications
| Paramètre | MAX3483ESA+T | MAX3483EESA+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Tension d'alimentation | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | 12 Mbps |
| Documented Low-Rate Operation | Up to 250 kbps | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Communication Mode | Half-duplex | — |
| Standards Supported | RS-485 and RS-422 | — |
| Driver Type | Slew-rate-limited true differential driver | Slew-rate-limited true driver |
| Disabled Output State | High impedance | — |
| Controls | Driver Enable and Receiver Enable | — |
| Boîtier | 8-SOIC, 8 pins | 8-pin NSOIC |
| Type de montage | Surface mount | Surface mount |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Courant d'alimentation | [DATA_NEEDED: operating supply current] | [DATA_NEEDED: supply current] |
| ESD Protection | [DATA_NEEDED: ESD protection rating for exact suffix] | ±15 kV |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Transceiver Configuration | — | 1 driver and 1 receiver |
| Tension d'alimentation de fonctionnement | — | 3 V to 3.6 V |
| Supported Standards | — | RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| Nombre de broches | — | 8 pins |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |