MAX3483ESA+T vs MAX3483EESA+T Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX3483ESA+T tarafından Analog Devices ve MAX3483EESA+T tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
MAX3483EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483EESA+T ✓ AktifÖzellik Karşılaştırması
| Parametre | MAX3483ESA+T | MAX3483EESA+T |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Besleme Gerilimi | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | 12 Mbps |
| Documented Low-Rate Operation | Up to 250 kbps | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Communication Mode | Half-duplex | — |
| Standards Supported | RS-485 and RS-422 | — |
| Driver Type | Slew-rate-limited true differential driver | Slew-rate-limited true driver |
| Disabled Output State | High impedance | — |
| Controls | Driver Enable and Receiver Enable | — |
| Paket | 8-SOIC, 8 pins | 8-pin NSOIC |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | — |
| Besleme Akımı | [DATA_NEEDED: operating supply current] | [DATA_NEEDED: supply current] |
| ESD Protection | [DATA_NEEDED: ESD protection rating for exact suffix] | ±15 kV |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Transceiver Configuration | — | 1 driver and 1 receiver |
| İşletim Besleme Gerilimi | — | 3 V to 3.6 V |
| Supported Standards | — | RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| Pin Sayısı | — | 8 pins |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |