MAX3485CSA+T vs MAX3485ECSA+T Comparaison

Comparaison détaillée côte à côte de MAX3485CSA+T par Analog Devices et MAX3485ECSA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX3485CSA+T MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T ✓ Actif

Comparaison des spécifications

Paramètre MAX3485CSA+T MAX3485ECSA+T
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type RS-485/RS-422 half-duplex transceiver RS-485/RS-422 half-duplex transceiver
Supply Voltage Range 3 V to 3.6 V 3 V to 3.6 V
Maximum Data Rate 10 Mbps 12 Mbps
Driver Channels 1 —
Receiver Channels 1 —
Duplex Mode Half-duplex —
Supported Standards RS-422 and RS-485 —
Boîtier 8-pin SOIC (NSOIC-8) 8-pin NSOIC (SOIC-8)
Type de montage Surface mount Surface mount
Driver Edge Rate Slew-rate limited —
Driver Fault Protection Short-circuit current limiting and thermal shutdown —
Receiver Fail-Safe Supported —
Driver Output State During Thermal Shutdown High impedance —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] [DATA_NEEDED: quiescent supply current]
ESD Protection [DATA_NEEDED: ESD protection rating] —
Statut RoHS [DATA_NEEDED: RoHS status] RoHS3 compliant
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Standard Reel Quantity [DATA_NEEDED: standard reel quantity] —
ESD Protection (Bus Pins) — +/-15 kV
Driver / Receiver Count — 1 driver, 1 receiver
Duplex — Half-duplex
Driver Output Type — Slew-rate-limited differential
Operating Supply Range — 3.3 V powered, single supply
Lead-Free Status — Lead free
Driver Protection — Short-circuit current limit and thermal shutdown
ESD Rating Reference — +/-15 kV ESD-protected bus pins
Receiver Common-Mode Range — [DATA_NEEDED: receiver common-mode voltage range]
Unit Load / Max Nodes — [DATA_NEEDED: unit load and maximum node count]
Data Rate of Alternative MAX3485CSA+ — 10 Mbps

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis