MAX3485CSA+T vs MAX3485ECSA+T So sánh
So sánh chi tiết song song của MAX3485CSA+T bằng Analog Devices và MAX3485ECSA+T bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECSA+T ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX3485CSA+T | MAX3485ECSA+T |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | RS-485/RS-422 half-duplex transceiver | RS-485/RS-422 half-duplex transceiver |
| Supply Voltage Range | 3 V to 3.6 V | 3 V to 3.6 V |
| Maximum Data Rate | 10 Mbps | 12 Mbps |
| Driver Channels | 1 | — |
| Receiver Channels | 1 | — |
| Duplex Mode | Half-duplex | — |
| Supported Standards | RS-422 and RS-485 | — |
| Hộp | 8-pin SOIC (NSOIC-8) | 8-pin NSOIC (SOIC-8) |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Driver Edge Rate | Slew-rate limited | — |
| Driver Fault Protection | Short-circuit current limiting and thermal shutdown | — |
| Receiver Fail-Safe | Supported | — |
| Driver Output State During Thermal Shutdown | High impedance | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | [DATA_NEEDED: quiescent supply current] |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | RoHS3 compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Standard Reel Quantity | [DATA_NEEDED: standard reel quantity] | — |
| ESD Protection (Bus Pins) | — | +/-15 kV |
| Driver / Receiver Count | — | 1 driver, 1 receiver |
| Duplex | — | Half-duplex |
| Driver Output Type | — | Slew-rate-limited differential |
| Operating Supply Range | — | 3.3 V powered, single supply |
| Lead-Free Status | — | Lead free |
| Driver Protection | — | Short-circuit current limit and thermal shutdown |
| ESD Rating Reference | — | +/-15 kV ESD-protected bus pins |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Unit Load / Max Nodes | — | [DATA_NEEDED: unit load and maximum node count] |
| Data Rate of Alternative MAX3485CSA+ | — | 10 Mbps |