MAX3488CSA+T vs MAX3488CSA+ Comparaison
Comparaison détaillée côte à côte de MAX3488CSA+T par Analog Devices et MAX3488CSA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3488CSA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+T ✓ ActifAnalog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX3488CSA+T | MAX3488CSA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Edge Rate | Slew-rate limited | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Boîtier | 8-SOIC, 0.154 m body width and 3.90 mm overall width | 8-pin NSOIC |
| Nombre de broches | 8 pins | — |
| Type de montage | Surface mount | Surface mount |
| Packaging | Tape and reel | — |
| Plage de température de fonctionnement | 0°C to +70°C | — |
| EMI Control | Slew-rate-limited driver reduces EMI | Slew-rate-limited driver intended to reduce EMI |
| Cable Reflection Control | Reduced reflections from slew-rate limiting | Slew-rate-limited driver intended to reduce reflections |
| Logic Compatibility | 3.3V transceiver interface | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| Tension d'alimentation | — | 3.3 V |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Driver Edge Control | — | Slew-rate limited |
| Communication Standard | — | RS-485/RS-422 |
| Low-Power Family | — | 3.3 V, low-power transceiver |
| Application Topology | — | RS-422 point-to-point and RS-485 multidrop |
| Differential Signal | — | Balanced line signaling |
| Logic Interface | — | Digital logic-level driver and receiver |
| Manufacturer Product Status | — | Production |
| Manufacturer Data Sheet Revision | — | Rev. 2 |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| ESD Rating | — | [DATA_NEEDED: ESD rating] |
| Typical Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Isolation | — | [DATA_NEEDED: isolation rating] |