MAX3488CSA+T vs MAX3488CSA+ तुलना
विस्तृत दोनों ओर की तुलना MAX3488CSA+T द्वारा Analog Devices और MAX3488CSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX3488CSA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+T ✓ सक्रियAnalog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX3488CSA+T | MAX3488CSA+ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Edge Rate | Slew-rate limited | — |
| Supported Protocols | RS-422 and RS-485 | — |
| पैकेज | 8-SOIC, 0.154 m body width and 3.90 mm overall width | 8-pin NSOIC |
| पिन की संख्या | 8 pins | — |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Packaging | Tape and reel | — |
| ऑपरेटिंग तापमान रेंज | 0°C to +70°C | — |
| EMI Control | Slew-rate-limited driver reduces EMI | Slew-rate-limited driver intended to reduce EMI |
| Cable Reflection Control | Reduced reflections from slew-rate limiting | Slew-rate-limited driver intended to reduce reflections |
| Logic Compatibility | 3.3V transceiver interface | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| सप्लाई वोल्टेज | — | 3.3 V |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Driver Edge Control | — | Slew-rate limited |
| Communication Standard | — | RS-485/RS-422 |
| Low-Power Family | — | 3.3 V, low-power transceiver |
| Application Topology | — | RS-422 point-to-point and RS-485 multidrop |
| Differential Signal | — | Balanced line signaling |
| Logic Interface | — | Digital logic-level driver and receiver |
| Manufacturer Product Status | — | Production |
| Manufacturer Data Sheet Revision | — | Rev. 2 |
| ऑपरेटिंग तापमान | — | [DATA_NEEDED: operating temperature range] |
| ESD Rating | — | [DATA_NEEDED: ESD rating] |
| Typical Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Isolation | — | [DATA_NEEDED: isolation rating] |