MAX485CSA+ vs MAX485ESA+ Comparaison
Comparaison détaillée côte à côte de MAX485CSA+ par Analog Devices et MAX485ESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MAX485CSA+ | MAX485ESA+ |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| Communication Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| Maximum Data Rate | 2.5Mbps | — |
| Driver Slew Rate | Unlimited for the MAX485 family | — |
| Device Type | Low-power differential transceiver | — |
| Boîtier | 8-pin SOIC | 8-SOIC (SOIC-8) |
| Nombre de broches | 8 pins | — |
| Type de montage | Surface mount | Surface Mount |
| Tension d'alimentation | [DATA_NEEDED: supply voltage range] | 4.75 V to 5.25 V (5 V nominal) |
| Courant d'alimentation | [DATA_NEEDED: unloaded and loaded supply current] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: MAX485CSA operating temperature range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: receiver differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Short-Circuit Protection | [DATA_NEEDED: driver short-circuit protection duration] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Fonction | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Débit de données | — | 2.5 Mbps |
| Supply Current (unloaded) | — | 120 µA to 500 µA |
| Receiver Hysteresis | — | 70 mV (typ) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold (V_TH) | — | -0.2 V min / +0.2 V max |
| ESD Protection (HBM, driver output) | — | ±15 kV (per datasheet) |
| Unit Load | — | 1/8 (up to 256 transceivers on bus) |
| Température de fonctionnement | — | -40 °C to +85 °C |
| Statut RoHS | — | Compliant (per Maxim/ADI datasheet suffix '+') |