MAX485CSA+ vs MAX485ESA+ Comparação
Comparação detalhada lado a lado de MAX485CSA+ por Analog Devices e MAX485ESA+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | MAX485CSA+ | MAX485ESA+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Transceiver Configuration | 1 driver and 1 receiver | — |
| Communication Standards | RS-485 and RS-422 | — |
| Duplex Mode | Half-duplex | — |
| Maximum Data Rate | 2.5Mbps | — |
| Driver Slew Rate | Unlimited for the MAX485 family | — |
| Device Type | Low-power differential transceiver | — |
| Encapsulamento | 8-pin SOIC | 8-SOIC (SOIC-8) |
| Contagem de pinos | 8 pins | — |
| Tipo de montagem | Surface mount | Surface Mount |
| Tensão de alimentação | [DATA_NEEDED: supply voltage range] | 4.75 V to 5.25 V (5 V nominal) |
| Corrente de alimentação | [DATA_NEEDED: unloaded and loaded supply current] | — |
| Faixa de temperatura de operação | [DATA_NEEDED: MAX485CSA operating temperature range] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: receiver differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Short-Circuit Protection | [DATA_NEEDED: driver short-circuit protection duration] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Função | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Taxa de dados | — | 2.5 Mbps |
| Supply Current (unloaded) | — | 120 µA to 500 µA |
| Receiver Hysteresis | — | 70 mV (typ) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold (V_TH) | — | -0.2 V min / +0.2 V max |
| ESD Protection (HBM, driver output) | — | ±15 kV (per datasheet) |
| Unit Load | — | 1/8 (up to 256 transceivers on bus) |
| Temperatura de operação | — | -40 °C to +85 °C |
| Status RoHS | — | Compliant (per Maxim/ADI datasheet suffix '+') |