MAX485ECPA+ vs MAX485EEPA+ Comparaison
Comparaison détaillée côte à côte de MAX485ECPA+ par Maxim Integrated et MAX485EEPA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX485ECPA+ | MAX485EEPA+ |
|---|---|---|
| Marque | Maxim Integrated | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Transceiver Configuration | 1 driver / 1 receiver, half-duplex | 1 transmitter and 1 receiver |
| Interface Standard | RS-485 / RS-422 differential | — |
| Tension d'alimentation | 5 V nominal (4.5 V to 5.5 V) | — |
| Maximum Data Rate | 1 Mbps (slew-rate-limited driver) | [DATA_NEEDED: maximum data rate] |
| Driver Output Type | Differential, limited slew rate | — |
| ESD Protection | +/-15 kV on driver outputs and receiver inputs | 15 kV |
| Boîtier | PDIP-8 (8-pin plastic DIP, through-hole) | — |
| Type de montage | Through Hole | Through-hole |
| Température de fonctionnement | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] | — |
| Quiescent (Supply) Current | [DATA_NEEDED: quiescent current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver differential threshold] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: differential output voltage] | — |
| Driver Output Current | [DATA_NEEDED: output current (standard / high-impedance load)] | [DATA_NEEDED: driver output current] |
| Enable Pins | DE (driver enable) and /RE (receiver enable, active-low), separate pins | — |
| Short-Circuit Protection | Yes, driver outputs are short-circuit current limited | — |
| Arrêt thermique | Yes, protects against excessive power dissipation | — |
| Quiescent Current Shutdown Pin | Not present on this device | — |
| Statut RoHS | Compliant (Maxim lead-free suffix '+') | — |
| Qualification | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] | — |
| Communication Standards | — | RS-422 and RS-485 |
| Operating Mode | — | Half-duplex |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Power Class | — | Low-power |
| Driver Slew Rate | — | Slew-rate-limited |
| Logic Input | — | 1 data input |
| Logic Output | — | 1 data output |
| Differential Bus Inputs | — | 2 differential inputs: A and B |
| Package Type | — | 8-pin PDIP |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |