MAX485ECPA+ vs MAX485EEPA+ 比較
詳細な並列比較: MAX485ECPA+ メーカー: Maxim Integrated および MAX485EEPA+ メーカー: Maxim Integrated。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ 生産中仕様比較
| パラメータ | MAX485ECPA+ | MAX485EEPA+ |
|---|---|---|
| ブランド | Maxim Integrated | Maxim Integrated |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Transceiver Configuration | 1 driver / 1 receiver, half-duplex | 1 transmitter and 1 receiver |
| Interface Standard | RS-485 / RS-422 differential | — |
| 電源電圧 | 5 V nominal (4.5 V to 5.5 V) | — |
| Maximum Data Rate | 1 Mbps (slew-rate-limited driver) | [DATA_NEEDED: maximum data rate] |
| Driver Output Type | Differential, limited slew rate | — |
| ESD Protection | +/-15 kV on driver outputs and receiver inputs | 15 kV |
| パッケージ | PDIP-8 (8-pin plastic DIP, through-hole) | — |
| 実装タイプ | Through Hole | Through-hole |
| 動作温度 | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] | — |
| Quiescent (Supply) Current | [DATA_NEEDED: quiescent current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver differential threshold] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: differential output voltage] | — |
| Driver Output Current | [DATA_NEEDED: output current (standard / high-impedance load)] | [DATA_NEEDED: driver output current] |
| Enable Pins | DE (driver enable) and /RE (receiver enable, active-low), separate pins | — |
| Short-Circuit Protection | Yes, driver outputs are short-circuit current limited | — |
| 熱シャットダウン | Yes, protects against excessive power dissipation | — |
| Quiescent Current Shutdown Pin | Not present on this device | — |
| RoHS ステータス | Compliant (Maxim lead-free suffix '+') | — |
| Qualification | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] | — |
| Communication Standards | — | RS-422 and RS-485 |
| Operating Mode | — | Half-duplex |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Power Class | — | Low-power |
| Driver Slew Rate | — | Slew-rate-limited |
| Logic Input | — | 1 data input |
| Logic Output | — | 1 data output |
| Differential Bus Inputs | — | 2 differential inputs: A and B |
| Package Type | — | 8-pin PDIP |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |