MAX485EESA+ vs MAX485ESA+T Comparaison
Comparaison détaillée côte à côte de MAX485EESA+ par Analog Devices et MAX485ESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ ActifComparaison des spécifications
| Paramètre | MAX485EESA+ | MAX485ESA+T |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 Transceiver | RS-485/RS-422 transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Débit de données | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Boîtier / Format | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| Type de montage | Surface Mount | Surface mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| Niveau MSL | 1 (Unlimited) | — |
| Transceiver Configuration | — | 1 driver and 1 receiver |
| Operating Mode | — | Half-duplex |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Maximum Data Rate | — | 2.5 Mbps |
| Slew Rate Limiting | — | Not limited |
| Driver Short-Circuit Protection | — | Current limited and protected |
| Supported Standards | — | RS-485 and RS-422 |
| Boîtier | — | 8-pin SOIC |
| Package Pin Count | — | 8 pins |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Statut RoHS | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | unknown |