MAX485EESA+ vs MAX485ESA+T مقایسه

مقایسه دقیق کنار به کنار MAX485EESA+ توسط Analog Devices و MAX485ESA+T توسط Analog Devices. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.

Analog Devices
MAX485ESA+T MAX485ESA+T - 2.5Mbps RS-485/RS-422 Transceiver | ADI

MAX485ESA+T - 2.5Mbps RS-485/RS-422 Transceiver | ADI

MAX485ESA+T ✓ فعال

مقایسه مشخصات

پارامتر MAX485EESA+ MAX485ESA+T
برند Analog Devices Analog Devices
دسته‌بندی Interface ICs Interface ICs
وضعیت چرخه عمر فعال فعال
Product Type RS-485/RS-422 Transceiver RS-485/RS-422 transceiver
Protocol RS-485, RS-422 —
Duplex Half-Duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 4.75 V to 5.25 V —
نرخ داده Up to 2.5 Mbps —
ESD Protection (Bus Pins, HBM) ±15 kV —
Driver Slew Rate Limited (low-EMI) —
Quiescent Supply Current 1 mA (typical) —
Number of Nodes on Bus 32 (1/2 unit load) —
Receiver Input Impedance 96 kΩ (1/2 unit load) —
محدوده دمای کاری -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
بسته‌بندی / کیس 8-pin SOIC (SO-8, 3.9 mm body) —
نوع نصب Surface Mount Surface mount
Lead-Free / RoHS Status Lead-Free, RoHS compliant —
سطح MSL 1 (Unlimited) —
Transceiver Configuration — 1 driver and 1 receiver
Operating Mode — Half-duplex
Supply Voltage Range — 4.75 V to 5.25 V
Maximum Data Rate — 2.5 Mbps
Slew Rate Limiting — Not limited
Driver Short-Circuit Protection — Current limited and protected
Supported Standards — RS-485 and RS-422
بسته‌بندی — 8-pin SOIC
Package Pin Count — 8 pins
جریان تغذیه — [DATA_NEEDED: supply current]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Input Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Common-Mode Voltage Range — [DATA_NEEDED: common-mode voltage range]
ESD Protection — [DATA_NEEDED: ESD protection rating]
وضعیت RoHS — unknown
REACH Status — unknown
AEC-Q100 Qualification — unknown

دیتاشیت‌ها و منابع

مرور همه محصولات ایجاد BOM درخواست استعلام قیمت