MAX485EESA+T vs ADM485JNZ Comparaison

Comparaison détaillée côte à côte de MAX485EESA+T par Analog Devices et ADM485JNZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ Actif

Comparaison des spécifications

Paramètre MAX485EESA+T ADM485JNZ
Marque Analog Devices Analog Devices
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Product Type Half-duplex RS-485/RS-422 transceiver —
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Nominal Supply Voltage 5 V —
Maximum Data Rate 2.5 Mbps 5 Mbps
Driver Output Type Slew-rate-limited differential driver —
Receiver Output Type Differential logic-level receiver —
ESD Protection ±15 kV —
Communication Mode Half-duplex —
Supported Standards RS-485 and RS-422 —
Boîtier 8-pin NSOIC/SOIC —
Type de montage Surface mount Through-hole
Plage de température de fonctionnement -40 °C to +85 °C —
Driver and Receiver Count 1 driver and 1 receiver —
Power Classification Low-power transceiver —
Statut RoHS [DATA_NEEDED: RoHS status] ROHS3 compliant
REACH Status [DATA_NEEDED: REACH status] —
MSL [DATA_NEEDED: moisture sensitivity level] —
Maximum Bus Length [DATA_NEEDED: maximum bus length] —
Transceiver Configuration — 1 transmitter and 1 receiver
Supported Protocols — EIA RS-485 and EIA RS-422
Bus Common-Mode Range — +12 V
Logic Interface — Differential driver and differential receiver
Driver Enable Control — Logic-controlled input
Receiver Enable Control — Logic-controlled input
Circuit Technology — Low-power BiCMOS
Thermal Protection — Thermal shutdown protection
Output Protection — Short-circuit protection
Package Type — 8-pin PDIP
Package Pitch — 7.62 mm
Package Form Factor — 8-DIP, 0.300 inch
Packaging — Tube
Minimum Operating Temperature — [DATA_NEEDED: minimum operating temperature]
Maximum Operating Temperature — [DATA_NEEDED: maximum operating temperature]
Maximum Supply Current — [DATA_NEEDED: maximum supply current]
Propagation Delay — [DATA_NEEDED: driver and receiver propagation delay]
Differential Input Sensitivity — [DATA_NEEDED: differential input sensitivity]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis