MAX485EESA+T vs ADM485JNZ So sánh

So sánh chi tiết song song của MAX485EESA+T bằng Analog Devices và ADM485JNZ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX485EESA+T MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T - 2.5Mbps RS-485 Transceiver | Analog Devices

MAX485EESA+T ✓ Hoạt động
Analog Devices
ADM485JNZ ADM485JNZ - 5V 5Mbps RS-485/422 Transceiver | Analog Devices

ADM485JNZ - 5V 5Mbps RS-485/422 Transceiver | Analog Devices

ADM485JNZ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX485EESA+T ADM485JNZ
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex RS-485/RS-422 transceiver —
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Nominal Supply Voltage 5 V —
Maximum Data Rate 2.5 Mbps 5 Mbps
Driver Output Type Slew-rate-limited differential driver —
Receiver Output Type Differential logic-level receiver —
ESD Protection ±15 kV —
Communication Mode Half-duplex —
Supported Standards RS-485 and RS-422 —
Hộp 8-pin NSOIC/SOIC —
Kiểu lắp đặt Surface mount Through-hole
Khoảng nhiệt độ hoạt động -40 °C to +85 °C —
Driver and Receiver Count 1 driver and 1 receiver —
Power Classification Low-power transceiver —
Trạng thái RoHS [DATA_NEEDED: RoHS status] ROHS3 compliant
REACH Status [DATA_NEEDED: REACH status] —
MSL [DATA_NEEDED: moisture sensitivity level] —
Maximum Bus Length [DATA_NEEDED: maximum bus length] —
Transceiver Configuration — 1 transmitter and 1 receiver
Supported Protocols — EIA RS-485 and EIA RS-422
Bus Common-Mode Range — +12 V
Logic Interface — Differential driver and differential receiver
Driver Enable Control — Logic-controlled input
Receiver Enable Control — Logic-controlled input
Circuit Technology — Low-power BiCMOS
Thermal Protection — Thermal shutdown protection
Output Protection — Short-circuit protection
Package Type — 8-pin PDIP
Package Pitch — 7.62 mm
Package Form Factor — 8-DIP, 0.300 inch
Packaging — Tube
Minimum Operating Temperature — [DATA_NEEDED: minimum operating temperature]
Maximum Operating Temperature — [DATA_NEEDED: maximum operating temperature]
Maximum Supply Current — [DATA_NEEDED: maximum supply current]
Propagation Delay — [DATA_NEEDED: driver and receiver propagation delay]
Differential Input Sensitivity — [DATA_NEEDED: differential input sensitivity]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá