MC33887PEK vs MC33887PNB Comparaison
Comparaison détaillée côte à côte de MC33887PEK par NXP Semiconductors et MC33887PNB par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MC33887PEK | MC33887PNB |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Dernier achat | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,82 | $4,32 |
| Configuration de sortie | H-Bridge (full bridge) | — |
| Motor Type | Brushed DC | — |
| Supply Voltage (VPWR/VCC) | 5 V to 28 V | — |
| Continuous Output Current | 5.0 A | — |
| Peak Output Current | 8.0 A (pulse) | — |
| RDS(on) per MOSFET (typ) | 120 mOhm at 25 C | — |
| Current Feedback Ratio | 1/375 of high-side load current | — |
| Sleep Mode Current | < 50 uA typical | — |
| Logic Input Compatibility | TTL / CMOS | — |
| PWM Frequency (recommended) | [DATA_NEEDED: PWM frequency max] | — |
| Température de fonctionnement | -40 C to +125 C | -40 C to +125 C |
| Boîtier | 54-SOIC-EP (HSOP-54) with exposed thermal pad | 36-PWR QFN (9x9 mm) with exposed pad |
| Thermal Resistance (junction-to-case) | approximately 1 C/W | — |
| Protection Features | Thermal shutdown, cross-conduction prevention, internal current limit | Thermal shutdown, short-circuit, undervoltage lockout |
| Charge Pump | Internal (supports 100% duty cycle) | Integrated |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| Lead-Free / RoHS | Lead-free; RoHS compliance per NXP product page | — |
| Tube Quantity | 27 per tube | — |
| Fonction | — | H-Bridge motor driver with load current feedback |
| Topologie | — | Monolithic H-Bridge, N-channel MOSFET output |
| Supply Voltage (V+) | — | 5 V to 28 V |
| Continuous Load Current | — | 5 A |
| Peak Load Current | — | [DATA_NEEDED: peak current] |
| RDS(ON) per MOSFET | — | [DATA_NEEDED: RDS(ON) value] |
| Current Sense Ratio | — | 1/375 (0.00266) |
| Current Sense Output (FB pin) | — | Ground-referenced analog |
| Control Inputs | — | IN1, IN2 logic inputs |
| Sleep Mode | — | Yes (low quiescent current) |
| Thermal Resistance (theta_JC) | — | [DATA_NEEDED: thermal resistance] |
| Statut RoHS | — | Compliant (per NXP product page) |
| Statut du cycle de vie | — | No Longer Manufactured (NXP product page) |