MK60FN1M0VMD12 vs MK64FX512VMD12 Comparaison
Comparaison détaillée côte à côte de MK60FN1M0VMD12 par NXP Semiconductors et MK64FX512VMD12 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MK64FX512VMD12 - 120MHz ARM Cortex-M4 MCU 512KB Flash | NXP
MK64FX512VMD12 ✓ ActifComparaison des spécifications
| Paramètre | MK60FN1M0VMD12 | MK64FX512VMD12 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $11,20 | $10,45 |
| Core Architecture | ARM Cortex-M4F (with FPU + DSP) | ARM Cortex-M4 with FPU + DSP |
| CPU Maximum Frequency | 120 MHz | — |
| Program Flash | 1 MB (1024 KB) | 512 KB |
| SRAM | 128 KB | 256 KB |
| FlexMemory / EEPROM Emulation | Yes (256 KB FlexNVM, partitionable) | — |
| Operating Voltage Range | 1.71 V to 3.6 V | — |
| Température de fonctionnement | -40C to +105C (Industrial) | — |
| Boîtier | 144-MAPBGA 13x13 mm | 144-MAPBGA 13x13 mm |
| USB | USB 2.0 Full-Speed OTG + USB 2.0 High-Speed (with integrated PHY) | — |
| Ethernet | 10/100 Mbps MAC with IEEE 1588 (MII/RMII interface to external PHY) | — |
| SAR ADC | 16-bit, dual ADC, up to 24 channels | — |
| DAC | 12-bit DAC | 12-bit |
| Timers | FlexTimer (FTM) modules; PDB; LPIT | — |
| Communication Peripherals | 3x UART, 2x CAN (FlexCAN), 3x SPI, 3x I2C, I2S | — |
| External Bus | FlexBus + SDRAM controller | — |
| Low-Power Modes | VLLS0/1/3, LLS, VLPR, RUN modes (~200 uA/MHz typical) | — |
| Security | Hardware CRC, tamper detect, unique 80-bit device ID | — |
| Type de montage | Surface Mount (BGA) | Surface Mount (BGA) |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Fréquence d'horloge maximale | — | 120 MHz |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| Plage de température de fonctionnement | — | -40 C to +105 C (VMD industrial grade) |
| ADC | — | 16-bit, up to 24 single-ended channels |
| Communication Interfaces | — | USB 2.0 FS OTG, 10/100 Ethernet MAC, 2x CAN 2.0B, 3x SPI, 3x UART, 2x I2C, I2S |
| Timer Modules | — | 4x 32-bit FlexTimer, 2x 16-bit low-power timer, RTC |
| Internal Voltage Regulator | — | 1.2 V core LDO (VCAP pin) |
| Niveau MSL | — | 3 (per JEDEC J-STD-020) |