MK64FN1M0VLL12 vs MK24FN1M0VLL12R Comparaison
Comparaison détaillée côte à côte de MK64FN1M0VLL12 par NXP Semiconductors et MK24FN1M0VLL12R par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12 ✓ ActifNXP Semiconductors
MK24FN1M0VLL12R - 120MHz Cortex-M4 K24 MCU, 1MB Flash, USB | NXP
MK24FN1M0VLL12R ✓ ActifComparaison des spécifications
| Paramètre | MK64FN1M0VLL12 | MK24FN1M0VLL12R |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,95 | $10,80 |
| Manufacturer | NXP Semiconductors | — |
| Series | Kinetis K64 | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP) | — |
| Core Size | 32-bit | — |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash | — |
| RAM Size | 256 KB SRAM | — |
| Flash Memory Type | FTFE - Non-Flex (4 KB sector, 8-byte phrase) | — |
| Supply Voltage (VDD) | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) | — |
| Plage de température de fonctionnement | -40 C to +105 C (industrial) | — |
| Boîtier / Format | 100-LQFP, 14x14 mm, 0.5 mm pitch | — |
| Type de montage | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed OTG, on-chip FS transceiver | USB 2.0 Full-Speed OTG with on-chip transceiver |
| Ethernet | 10/100 Mbps MAC, MII / RMII interface | — |
| Hardware Cryptography | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG | — |
| ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) | 16-bit SAR ADC |
| DAC | 12-bit | 12-bit DAC |
| GPIO | [DATA_NEEDED: GPIO count for this LQFP-100 mask] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention | — |
| Statut RoHS | Compliant | — |
| Niveau MSL | 3 (per JEDEC J-STD-020) | 3 (168 hours) |
| Core | — | ARM Cortex-M4F with FPU, MPU, DSP extensions |
| Program Flash | — | 1 MB (1M x 8) |
| SRAM | — | 256 KB |
| CAN | — | 2 x CAN 2.0B |
| SPI | — | 3 modules |
| I2C | — | 3 modules |
| UART | — | 4 modules |
| Tension d'alimentation | — | 1.71 V to 3.6 V |
| Température de fonctionnement | — | -40C to +105C |
| Boîtier | — | 100-LQFP (14 x 14 mm) |
| Run Current | — | 250 uA/MHz (typical) |
| Stop Current | — | <340 nA (typical) |
| Wake-up Time | — | 4.5 us from Stop mode |