MMA6233QR2 vs MMA6261QR2 Comparaison
Comparaison détaillée côte à côte de MMA6233QR2 par NXP Semiconductors et MMA6261QR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MMA6233QR2 - ±10g Dual-Axis Micromachined Accelerometer | NXP
MMA6233QR2 ObsoleteComparaison des spécifications
| Paramètre | MMA6233QR2 | MMA6261QR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,77 | $3,85 |
| Type de capteur | Accelerometer, Dual-Axis (X, Y) | Accelerometer, dual-axis (X, Y) |
| Full-Scale Range | ±10g (±6g via g-select) | — |
| Sensitivity | 120 mV/g (typical at 3.3V Vdd, [DATA_NEEDED: sensitivity tolerance]) | factory-set, ratiometric |
| Type de sortie | Analog, ratiometric | Analog voltage, ratiometric |
| Output Voltage at 0g | VDD/2 | — |
| Bandwidth | 900 Hz (maximum) | 300 Hz |
| Supply Voltage (VDD) | 3.0 V to 5.25 V | 2.7 V to 3.6 V |
| Courant d'alimentation | 2.5 mA (typical, [DATA_NEEDED: max]) | 1.5 mA (typical) |
| Température de fonctionnement | -20C to +85C | -20 C to +85 C |
| Densité de bruit | [DATA_NEEDED: noise density] | — |
| Nonlinearity | [DATA_NEEDED: nonlinearity %FS] | — |
| Self-Test | Yes (active-high logic input) | Yes (per axis) |
| g-Select Input | Yes (±10g or ±6g selection) | — |
| Boîtier | 16-pin QFN-EP (6x6 mm) | 16-QFN-EP (6x6 mm) HQCCN |
| Type de montage | Surface Mount | Surface Mount |
| Filter Type | 1-pole low-pass (factory-set cut-off) | — |
| Statut RoHS | Compliant | RoHS Compliant (contains lead, lead-free terminal finish) |
| Lead-Free Status | Contains Lead (NXP datasheet note) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Sensing Technology | — | Capacitive MEMS |
| Acceleration Range | — | ±1.5 g |
| Number of Axes | — | 2 (X, Y) |
| Zero-g Offset | — | factory-set |
| Filter | — | 1-pole low-pass, factory-set |
| Nombre de broches | — | 16 |