MMA7260QR2 vs MMA6260QR2 Comparaison
Comparaison détaillée côte à côte de MMA7260QR2 par NXP Semiconductors et MMA6260QR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MMA7260QR2 - ±1.5g-6g 3-Axis MEMS Accelerometer, QFN-16 | NXP
MMA7260QR2 ObsoleteComparaison des spécifications
| Paramètre | MMA7260QR2 | MMA6260QR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,10 | $4,65 |
| Type de capteur | 3-axis MEMS accelerometer (capacitive micromachined) | — |
| Acceleration Range | ±1.5g / 2g / 4g / 6g (selectable via g-Select pins) | ±1.5 g |
| Sensing Axes | X, Y, Z | — |
| Type de sortie | Analog (ratiometric voltage) | Analog, ratiometric |
| Tension d'alimentation | 2.2 V to 3.6 V | [DATA_NEEDED: Vdd range] |
| Courant d'alimentation | [DATA_NEEDED: typical active current in mA] | [DATA_NEEDED: Idd] |
| Sensitivity (1.5g) | 800 mV/g | — |
| Sensitivity (6g) | 200 mV/g | — |
| Bandwidth X / Y | 350 Hz | — |
| Bandwidth Z | 150 Hz | — |
| Zero-g Offset (typ) | [DATA_NEEDED: zero-g bias level] | — |
| Densité de bruit | [DATA_NEEDED: noise in mg/sqrt(Hz) or ug/sqrt(Hz)] | — |
| Filter Type | 1-pole low-pass (on-chip) | — |
| Température de fonctionnement | -20C to +85C | -40 °C to +85 °C |
| Boîtier | QFN-16 (6 mm x 6 mm, HQCCN) | 16-QFN-EP (6x6 mm) |
| Type de montage | Surface Mount | Surface Mount |
| g-Select Inputs | 2 logic pins (g-Sel1, g-Sel2) | — |
| Sleep Mode | Yes (Sleep pin) | — |
| Statut RoHS | RoHS Compliant | RoHS Compliant (per Digchip) |
| Lead-Free Status | Lead Free | — |
| Moisture Sensitivity | MSL 2 (per Avaq comparison data) | — |
| Origin | Freescale / Motorola semiconductor IP, now NXP | — |
| Type | — | Accelerometer, Dual Axis (X, Y) |
| Axis | — | X, Y (dual) |
| Sensitivity | — | [DATA_NEEDED: sensitivity V/g] |
| Bandwidth | — | 50 Hz (1-pole low-pass, factory set) |
| Self-Test | — | Yes (logic-high on ST pin) |
| g-Select Pins | — | Yes (4 sensitivity options) |
| Lead Status | — | Contains Lead (per Digchip, prior to conversion) |