MMA7260QR2 vs MMA6260QR2 Vergleich
Detaillierter Direktvergleich von MMA7260QR2 von NXP Semiconductors und MMA6260QR2 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MMA7260QR2 - ±1.5g-6g 3-Axis MEMS Accelerometer, QFN-16 | NXP
MMA7260QR2 ObsoleteSpezifikationsvergleich
| Parameter | MMA7260QR2 | MMA6260QR2 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motion Sensors | Motion Sensors |
| Lebenszyklusstatus | Obsolete | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,10 | $4,65 |
| Sensortyp | 3-axis MEMS accelerometer (capacitive micromachined) | — |
| Acceleration Range | ±1.5g / 2g / 4g / 6g (selectable via g-Select pins) | ±1.5 g |
| Sensing Axes | X, Y, Z | — |
| Ausgangstyp | Analog (ratiometric voltage) | Analog, ratiometric |
| Versorgungsspannung | 2.2 V to 3.6 V | [DATA_NEEDED: Vdd range] |
| Versorgungsstrom | [DATA_NEEDED: typical active current in mA] | [DATA_NEEDED: Idd] |
| Sensitivity (1.5g) | 800 mV/g | — |
| Sensitivity (6g) | 200 mV/g | — |
| Bandwidth X / Y | 350 Hz | — |
| Bandwidth Z | 150 Hz | — |
| Zero-g Offset (typ) | [DATA_NEEDED: zero-g bias level] | — |
| Rauschdichte | [DATA_NEEDED: noise in mg/sqrt(Hz) or ug/sqrt(Hz)] | — |
| Filter Type | 1-pole low-pass (on-chip) | — |
| Betriebstemperatur | -20C to +85C | -40 °C to +85 °C |
| Gehäuse | QFN-16 (6 mm x 6 mm, HQCCN) | 16-QFN-EP (6x6 mm) |
| Montageart | Surface Mount | Surface Mount |
| g-Select Inputs | 2 logic pins (g-Sel1, g-Sel2) | — |
| Sleep Mode | Yes (Sleep pin) | — |
| RoHS-Status | RoHS Compliant | RoHS Compliant (per Digchip) |
| Lead-Free Status | Lead Free | — |
| Moisture Sensitivity | MSL 2 (per Avaq comparison data) | — |
| Origin | Freescale / Motorola semiconductor IP, now NXP | — |
| Type | — | Accelerometer, Dual Axis (X, Y) |
| Axis | — | X, Y (dual) |
| Sensitivity | — | [DATA_NEEDED: sensitivity V/g] |
| Bandwidth | — | 50 Hz (1-pole low-pass, factory set) |
| Self-Test | — | Yes (logic-high on ST pin) |
| g-Select Pins | — | Yes (4 sensitivity options) |
| Lead Status | — | Contains Lead (per Digchip, prior to conversion) |