MPVZ5150GC7U vs MPXV10GC7U Comparaison

Comparaison détaillée côte à côte de MPVZ5150GC7U par NXP Semiconductors et MPXV10GC7U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPVZ5150GC7U MPVZ5150GC7U - 150kPa Vented Gauge Pressure Sensor | NXP

MPVZ5150GC7U - 150kPa Vented Gauge Pressure Sensor | NXP

MPVZ5150GC7U ✓ Actif
NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ Actif

Comparaison des spécifications

Paramètre MPVZ5150GC7U MPXV10GC7U
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $8,64 $6,10
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 150 kPa (0 PSI to 21.76 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
Type de sortie Analog Voltage (ratiometric) Analog Wheatstone Bridge (uncompensated mV)
Plage de tension de sortie 0.2 V to 4.7 V —
Tension d'alimentation 4.75 V to 5.25 V 3 V to 6 V (3 V typical excitation)
Courant d'alimentation [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Pressure Accuracy ±1.5 % (0 °C to 85 °C) —
Température de fonctionnement -40 °C to +125 °C [DATA_NEEDED: operating temperature range]
Storage Temperature [DATA_NEEDED: storage temperature] —
Response Time 1.0 ms (typical) —
Port Style Top Port, Male 0.13" (3.17 mm) Tube Top port, 0.13" (3.18 mm) tube inlet
Boîtier 8-DIP (Case 867F, 10.67 x 10.67 x 12.96 mm) 8-DIP (0.550", 13.97 mm) through-hole
Type de montage Through Hole Through-Hole
Statut RoHS Compliant [DATA_NEEDED: RoHS compliance]
Technology Piezoresistive (MEMS) with ASIC signal conditioning —
Media Compatibility Dry air and non-corrosive gases (silicone gel isolation) Dry non-corrosive gases (reference port vented to ambient)
Maximum Overpressure — [DATA_NEEDED: maximum overpressure rating]
Full-Scale Output — 0 mV to 35 mV at 3 V supply
Sensitivity — 3.5 mV/kPa nominal
Input Impedance — [DATA_NEEDED: bridge input impedance]
Output Impedance — [DATA_NEEDED: bridge output impedance]
Compensation — None on chip - external calibration required

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis