MPVZ5150GC7U vs MPXV10GC7U 비교

다음의 상세 나란히 비교: MPVZ5150GC7U 제조: NXP Semiconductors 및 MPXV10GC7U 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

NXP Semiconductors
MPVZ5150GC7U MPVZ5150GC7U - 150kPa Vented Gauge Pressure Sensor | NXP

MPVZ5150GC7U - 150kPa Vented Gauge Pressure Sensor | NXP

MPVZ5150GC7U ✓ 활성
NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ 활성

사양 비교

파라미터 MPVZ5150GC7U MPXV10GC7U
브랜드 NXP Semiconductors NXP Semiconductors
카테고리 Pressure Sensors Pressure Sensors
수명 주기 상태 활성 활성
재고 상태 In Stock In Stock
단가 (USD) $8.64 $6.10
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 150 kPa (0 PSI to 21.76 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
출력 유형 Analog Voltage (ratiometric) Analog Wheatstone Bridge (uncompensated mV)
출력 전압 범위 0.2 V to 4.7 V —
공급 전압 4.75 V to 5.25 V 3 V to 6 V (3 V typical excitation)
공급 전류 [DATA_NEEDED: supply current] [DATA_NEEDED: supply current]
Pressure Accuracy ±1.5 % (0 °C to 85 °C) —
동작 온도 -40 °C to +125 °C [DATA_NEEDED: operating temperature range]
Storage Temperature [DATA_NEEDED: storage temperature] —
Response Time 1.0 ms (typical) —
Port Style Top Port, Male 0.13" (3.17 mm) Tube Top port, 0.13" (3.18 mm) tube inlet
패키지 8-DIP (Case 867F, 10.67 x 10.67 x 12.96 mm) 8-DIP (0.550", 13.97 mm) through-hole
실장 유형 Through Hole Through-Hole
RoHS 상태 Compliant [DATA_NEEDED: RoHS compliance]
Technology Piezoresistive (MEMS) with ASIC signal conditioning —
Media Compatibility Dry air and non-corrosive gases (silicone gel isolation) Dry non-corrosive gases (reference port vented to ambient)
Maximum Overpressure — [DATA_NEEDED: maximum overpressure rating]
Full-Scale Output — 0 mV to 35 mV at 3 V supply
Sensitivity — 3.5 mV/kPa nominal
Input Impedance — [DATA_NEEDED: bridge input impedance]
Output Impedance — [DATA_NEEDED: bridge output impedance]
Compensation — None on chip - external calibration required

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청