MPX2100GP vs MPX2010GP Comparaison
Comparaison détaillée côte à côte de MPX2100GP par NXP Semiconductors et MPX2010GP par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
MPX2010GP - 10 kPa Vented Gauge Pressure Sensor | STMicroelectronics
MPX2010GP ✓ ActifComparaison des spécifications
| Paramètre | MPX2100GP | MPX2010GP |
|---|---|---|
| Marque | NXP Semiconductors | STMicroelectronics |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,40 | $7,20 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 to 14.5 psi (0 to 100 kPa) | 0 kPa to 10 kPa (0 to 1.45 PSI) |
| Maximum Overpressure | 58.02 psi (400 kPa) | — |
| Type de sortie | Wheatstone Bridge (analog voltage, ratiometric) | — |
| Full-Scale Span | 40 mV typical at 10 V supply | — |
| Offset | 0 mV minimum at 0 kPa | — |
| Tension d'alimentation | 10 V typical (ratiometric) | — |
| Maximum Operating Current | 6 mA | — |
| Port Size | Male 0.19 in (4.93 mm) barbed tube | — |
| Port Style | Barbed | Male, 0.19 inch (4.93 mm) tube, vented gauge |
| Boîtier | 4-SIP Module (Unibody through-hole) | — |
| Type de montage | Through-Hole | Through-Hole (SIP) |
| Temperature Compensation | On-chip, calibrated | On-chip, calibrated |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Technology | Silicon piezoresistive, MEMS | — |
| Termination Style | PCB (SIP pins) | — |
| Statut RoHS | unknown | Compliant |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Sensitivity (Full-Scale Span) | — | 25 mV typical at 10 V excitation |
| Plage de tension de sortie | — | 0 mV to 25 mV (10 V supply) |
| Offset (Zero Pressure) | — | 0 mV nominal |
| Supply Voltage (Excitation) | — | 10 V DC typical (max per datasheet) |
| Courant d'alimentation | — | 6 mA DC typical |
| Response Time | — | 1 ms typical |
| Linearity | — | [DATA_NEEDED: linearity %FS] |
| Plage de température de fonctionnement | — | -40 C to +125 C |
| Storage Temperature Range | — | -40 C to +125 C |
| Boîtier / Format | — | 4-SIP Module (Case 344B-01) |
| Media Compatibility | — | Dry gases (silicone gel isolation) |