MPX2102GP vs MPX2202GP Comparaison
Comparaison détaillée côte à côte de MPX2102GP par NXP Semiconductors et MPX2202GP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPX2102GP | MPX2202GP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,40 | $24,80 |
| Pressure Type | Vented Gauge | Vented Gauge |
| Operating Pressure Range | 0 kPa to 100 kPa (0 PSI to 14.5 PSI) | 0 kPa to 200 kPa (0 to 29.01 PSI) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Full-Scale Output (VoutFS) | 40 mV at 10 V excitation | — |
| Plage de tension de sortie | 0 mV to 40 mV | — |
| Excitation Voltage | 10 V typical (DC) | — |
| Sensitivity | 0.4 mV/kPa nominal | — |
| Linearity | 1.0 % maximum | — |
| Pressure Port | Male 0.19 in (4.93 mm) tube | — |
| Température de fonctionnement | 0 C to +85 C | -40 C to +125 C [DATA_NEEDED: confirm from datasheet curves] |
| Storage Temperature | [DATA_NEEDED: storage temperature range] | — |
| Temperature Compensation Range | 0 C to +85 C (on-chip) | — |
| Boîtier | 4-SIP Module (Unibody GP) | — |
| Type de montage | Through-Hole SIP | Through Hole |
| Sensor Technology | Silicon piezoresistive, monolithic diaphragm | — |
| Offset (null) | 0 mV to 1 mV typical | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance] |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Tension de sortie | — | 0 mV to 40 mV (at 10 V excitation) |
| Tension d'alimentation | — | 10 V DC nominal |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Port Size | — | Male, 0.19 in (4.93 mm) Tube |
| Boîtier / Format | — | 4-SIP Top Port Module |
| Termination Style | — | Through-Hole (PCB) |
| Accuracy | — | [DATA_NEEDED: linearity / accuracy specification] |
| Media Compatibility | — | Dry air or non-corrosive gases (per datasheet) |
| Compensation | — | On-chip temperature compensated and calibrated |