MPXA6115A6T1 vs MPXHZ6115A6T1 Comparaison
Comparaison détaillée côte à côte de MPXA6115A6T1 par STMicroelectronics et MPXHZ6115A6T1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
MPXA6115A6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXA6115A6T1 ✓ ActifNXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ ActifComparaison des spécifications
| Paramètre | MPXA6115A6T1 | MPXHZ6115A6T1 |
|---|---|---|
| Marque | STMicroelectronics | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $12,05 | $10,85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Type de sortie | Analog Voltage | Analog Voltage |
| Tension de sortie | 0.2 V to 4.7 V (at 5 V supply) | — |
| Tension d'alimentation | 4.75 V to 5.25 V | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Accuracy | ±1.5% FS | ±1.5% (0 °C to 85 °C) |
| Port Style | Single horizontal port (axial) | No Port (media-resistant PPS surface mount) |
| Boîtier | 8-SMD Gull Wing (SOP 8-surface-mount module) | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| Type de montage | Surface Mount | Surface Mount (PPS thermoplastic) |
| Termination Style | PCB / Gull Wing | — |
| Température de fonctionnement | -40 °C to +125 °C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, calibrated | — |
| Statut RoHS | Compliant (per distributor listings) | [DATA_NEEDED: RoHS compliance status] |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Output Function | Ratiometric to supply voltage | — |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Plage de tension de sortie | — | 0.2 V to 4.7 V (at 5 V supply) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| Plage de température de fonctionnement | — | -40 °C to +125 °C |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |
| Media Compatibility | — | Media-resistant PPS package; dry gas media recommended |