MPXA6115A6T1 vs MPXHZ6115A6T1 比較
詳細な並列比較: MPXA6115A6T1 メーカー: STMicroelectronics および MPXHZ6115A6T1 メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
STMicroelectronics
MPXA6115A6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXA6115A6T1 ✓ 生産中NXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ 生産中仕様比較
| パラメータ | MPXA6115A6T1 | MPXHZ6115A6T1 |
|---|---|---|
| ブランド | STMicroelectronics | NXP Semiconductors |
| カテゴリ | Pressure Sensors | Pressure Sensors |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $12.05 | $10.85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| 出力タイプ | Analog Voltage | Analog Voltage |
| 出力電圧 | 0.2 V to 4.7 V (at 5 V supply) | — |
| 電源電圧 | 4.75 V to 5.25 V | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Accuracy | ±1.5% FS | ±1.5% (0 °C to 85 °C) |
| Port Style | Single horizontal port (axial) | No Port (media-resistant PPS surface mount) |
| パッケージ | 8-SMD Gull Wing (SOP 8-surface-mount module) | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| 実装タイプ | Surface Mount | Surface Mount (PPS thermoplastic) |
| Termination Style | PCB / Gull Wing | — |
| 動作温度 | -40 °C to +125 °C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, calibrated | — |
| RoHS ステータス | Compliant (per distributor listings) | [DATA_NEEDED: RoHS compliance status] |
| MSLレベル | [DATA_NEEDED: MSL level] | — |
| Output Function | Ratiometric to supply voltage | — |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| 出力電圧範囲 | — | 0.2 V to 4.7 V (at 5 V supply) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| 動作温度範囲 | — | -40 °C to +125 °C |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |
| Media Compatibility | — | Media-resistant PPS package; dry gas media recommended |