MPXAZ6115AC6U vs MPXAZ6115A7U Comparaison
Comparaison détaillée côte à côte de MPXAZ6115AC6U par NXP Semiconductors et MPXAZ6115A7U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPXAZ6115AC6U | MPXAZ6115A7U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,40 | $10,10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Type de sortie | Analog Voltage | Analog Voltage |
| Plage de tension de sortie | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Tension d'alimentation | 5.0 V typical (4.75 V to 5.25 V) | 5.0 V typical |
| Courant d'alimentation | [DATA_NEEDED: supply current typical mA] | — |
| Accuracy | +/-1.5% Vfss (max) | ±1.5% (0C to 85C, after NXP factory calibration) |
| Température de fonctionnement | -40C to +125C | -40C to +125C |
| Port Style | Top Port, Male 0.13" (3.17 mm) Tube | Top axial tube, 0.13" (3.17 mm) diameter |
| Port Type | Single Axial Barbed | — |
| Boîtier | 8-SMD, Gull Wing, Top Port | — |
| Type de montage | Surface Mount | Through-Hole |
| Media Compatibility | Media Resistant (dry gases, isolated from harsh media) | Non-corrosive dry gases (media resistant) |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor networks | On-chip bipolar op-amp + thin-film resistor network |
| Temperature Compensation | Built-in (calibrated across full range) | On-chip, factory calibrated |
| Statut RoHS | Compliant | Compliant |
| Operating Pressure Min | — | 15 kPa |
| Operating Pressure Max | — | 115 kPa |
| Sensitivity | — | [DATA_NEEDED: typical sensitivity mV/kPa] |
| Boîtier / Format | — | 8-DIP Module (0.560 inch, 14.22 mm) |