MPXH6115A6U vs MPXHZ6115A6T1 Comparaison
Comparaison détaillée côte à côte de MPXH6115A6U par NXP Semiconductors et MPXHZ6115A6T1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP
MPXH6115A6U ✓ ActifNXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ ActifComparaison des spécifications
| Paramètre | MPXH6115A6U | MPXHZ6115A6T1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,95 | $10,85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Maximum Over-Pressure | 400 kPa | — |
| Sensitivity | 45.9 mV/kPa (typical) | — |
| Accuracy (0C to 85C) | 1.5 % (max) | — |
| Plage de tension de sortie | 0.2 V to 4.7 V | 0.2 V to 4.7 V (at 5 V supply) |
| Tension d'alimentation | 4.75 V to 5.25 V | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Courant d'alimentation | 6 mA (typical) | — |
| Température de fonctionnement | -40C to +125C | — |
| Compensated Temperature | 0C to +85C | — |
| Type de sortie | Analog, ratiometric to VCC | Analog Voltage |
| Boîtier | 8-SOIC (0.295", 7.50 mm width) with top-side pressure port | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| Type de montage | Surface Mount | Surface Mount (PPS thermoplastic) |
| Pressure Port | Vertical/Horizontal axial port (case variant 6) | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS compliance status] |
| Media Compatibility | Dry air, non-corrosive gases only | Media-resistant PPS package; dry gas media recommended |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Accuracy | — | ±1.5% (0 °C to 85 °C) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| Plage de température de fonctionnement | — | -40 °C to +125 °C |
| Port Style | — | No Port (media-resistant PPS surface mount) |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |