MPXV12GW6U vs MPXV7025DP Comparaison

Comparaison détaillée côte à côte de MPXV12GW6U par NXP Semiconductors et MPXV7025DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXV12GW6U MPXV12GW6U - 10 kPa Uncompensated Pressure Sensor | NXP

MPXV12GW6U - 10 kPa Uncompensated Pressure Sensor | NXP

MPXV12GW6U ✓ Actif
NXP Semiconductors
MPXV7025DP MPXV7025DP - 5V ±25kPa Differential Pressure Sensor | NXP/ST

MPXV7025DP - 5V ±25kPa Differential Pressure Sensor | NXP/ST

MPXV7025DP ✓ Actif

Comparaison des spécifications

Paramètre MPXV12GW6U MPXV7025DP
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $5,10 $8,05
Operating Pressure Range 0 kPa to 10 kPa (1.45 PSI) —
Type de sortie Analog Millivolt (Wheatstone bridge) Analog voltage, ratiometric
Output Span 0 mV to 55 mV at 3 V excitation —
Excitation Voltage 3 V typical —
Pressure Port Type Top port, 0.22" (5.59 mm) tube —
Boîtier / Format 8-SMD, Gull Wing, Top Port —
Type de montage Surface Mount Surface Mount
Température de fonctionnement -40 C to +125 C 0 °C to +85 °C
Accuracy [DATA_NEEDED: linearity + temperature coefficient] —
Configuration Vented Gauge (reference to atmosphere) —
Sensor Technology Silicon piezoresistive (MEMS strain gauge) —
Off-Pressure Offset 0 mV minimum (no offset specified) —
Compensation Uncompensated (external calibration required) —
Statut RoHS Compliant Compliant
Niveau MSL [DATA_NEEDED: MSL rating] —
Bridge Resistance [DATA_NEEDED: input / output bridge impedance] —
Typical Sensitivity [DATA_NEEDED: mV/kPa at 3 V] —
Pressure Type — Differential (Dual Port)
Pressure Range — -25 kPa to +25 kPa (-3.63 PSI)
Operating Pressure Max — ±25 kPa
Port Style — Dual ports, same side, male 0.13" (3.3 mm) tube
Tension d'alimentation — 5 V DC nominal
Plage de tension de sortie — 0.2 V to 4.7 V
Sensitivity — ~90 mV/kPa (at 5 V supply)
Linearity — ±5 % (over primary range)
Storage Temperature — -30 °C to +100 °C (per datasheet range)
Boîtier — 8-BSOP (SOP-8, 12.06 mm width), surface mount
Signal Conditioning — On-chip, calibrated and temperature compensated

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis