MPXV7025DP vs MPXV12GW6U Comparaison

Comparaison détaillée côte à côte de MPXV7025DP par NXP Semiconductors et MPXV12GW6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
MPXV7025DP MPXV7025DP - 5V ±25kPa Differential Pressure Sensor | NXP/ST

MPXV7025DP - 5V ±25kPa Differential Pressure Sensor | NXP/ST

MPXV7025DP ✓ Actif
NXP Semiconductors
MPXV12GW6U MPXV12GW6U - 10 kPa Uncompensated Pressure Sensor | NXP

MPXV12GW6U - 10 kPa Uncompensated Pressure Sensor | NXP

MPXV12GW6U ✓ Actif

Comparaison des spécifications

Paramètre MPXV7025DP MPXV12GW6U
Marque NXP Semiconductors NXP Semiconductors
Catégorie Pressure Sensors Pressure Sensors
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $8,05 $5,10
Pressure Type Differential (Dual Port) —
Pressure Range -25 kPa to +25 kPa (-3.63 PSI) —
Operating Pressure Max ±25 kPa —
Port Style Dual ports, same side, male 0.13" (3.3 mm) tube —
Tension d'alimentation 5 V DC nominal —
Type de sortie Analog voltage, ratiometric Analog Millivolt (Wheatstone bridge)
Plage de tension de sortie 0.2 V to 4.7 V —
Sensitivity ~90 mV/kPa (at 5 V supply) —
Linearity ±5 % (over primary range) —
Température de fonctionnement 0 °C to +85 °C -40 C to +125 C
Storage Temperature -30 °C to +100 °C (per datasheet range) —
Boîtier 8-BSOP (SOP-8, 12.06 mm width), surface mount —
Type de montage Surface Mount Surface Mount
Signal Conditioning On-chip, calibrated and temperature compensated —
Statut RoHS Compliant Compliant
Operating Pressure Range — 0 kPa to 10 kPa (1.45 PSI)
Output Span — 0 mV to 55 mV at 3 V excitation
Excitation Voltage — 3 V typical
Pressure Port Type — Top port, 0.22" (5.59 mm) tube
Boîtier / Format — 8-SMD, Gull Wing, Top Port
Accuracy — [DATA_NEEDED: linearity + temperature coefficient]
Configuration — Vented Gauge (reference to atmosphere)
Sensor Technology — Silicon piezoresistive (MEMS strain gauge)
Off-Pressure Offset — 0 mV minimum (no offset specified)
Compensation — Uncompensated (external calibration required)
Niveau MSL — [DATA_NEEDED: MSL rating]
Bridge Resistance — [DATA_NEEDED: input / output bridge impedance]
Typical Sensitivity — [DATA_NEEDED: mV/kPa at 3 V]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis