MSP430F413IPM vs MSP430F417IPM Comparaison

Comparaison détaillée côte à côte de MSP430F413IPM par Texas Instruments et MSP430F417IPM par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
MSP430F413IPM MSP430F413IPM - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments

MSP430F413IPM - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments

MSP430F413IPM ✓ Actif
Texas Instruments
MSP430F417IPM MSP430F417IPM - 8MHz 16-bit MCU 32KB Flash 96-seg LCD | TI

MSP430F417IPM - 8MHz 16-bit MCU 32KB Flash 96-seg LCD | TI

MSP430F417IPM ✓ Actif

Comparaison des spécifications

Paramètre MSP430F413IPM MSP430F417IPM
Marque Texas Instruments Texas Instruments
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Product Type 16-bit mixed-signal microcontroller —
CPU Architecture MSP430 16-bit RISC —
Fréquence d'horloge maximale 8 MHz 8 MHz
Flash Memory 8 KB —
SRAM 256 bytes 1 KB
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V
Active Current 200 µA at 1 MHz and 2.2 V —
Standby Current 0.7 µA —
Off-Mode Current with RAM Retention 0.1 µA —
Low-Power Modes 5 modes —
Standby Wake-Up Time Less than 6 µs —
LCD Segment Drive Capability 96 segments —
I/O Pin Count 48 pins —
Integrated Comparator 1 comparator —
Timer Resources One or two 16-bit timers depending on family configuration —
Clocking Frequency-Locked Loop (FLL+) —
Boîtier 64-pin LQFP, 10 mm × 10 mm 64-pin LQFP (PM, 10x10 mm)
Type de montage Surface mount Surface Mount
Statut RoHS Not specified Compliant (Green Package)
REACH Status Not specified —
Niveau MSL 3, 260°C, 168 hours —
Core Architecture — MSP430 CPU16 (RISC, 16-bit)
Series — MSP430x4xx
Instruction Cycle Time — 125 ns
Program Memory (Flash) — 32 KB (32K x 8 + 256B)
Active Mode Current (1 MHz, 2.2 V) — 200 µA
Standby Mode Current — 0.7 µA
Off Mode Current (RAM Retention) — 0.1 µA
Wake-Up Time from Standby — < 6 µs
Power-Saving Modes — 5
Clock System — FLL+ (Frequency-Locked Loop)
LCD Driver — 96 segments
Timers — 16-bit Timer_A
Analog Comparator — Yes
Scan Interface (Scan IF) — Yes
GPIO Pins — 48
Température de fonctionnement — -40°C to +85°C (Industrial)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis