MSP430F413IPM vs MSP430F417IPM Karşılaştırma

Ayrıntılı yan yana karşılaştırma MSP430F413IPM tarafından Texas Instruments ve MSP430F417IPM tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
MSP430F413IPM MSP430F413IPM - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments

MSP430F413IPM - 8MHz 16-Bit MCU with 8KB Flash | Texas Instruments

MSP430F413IPM ✓ Aktif
Texas Instruments
MSP430F417IPM MSP430F417IPM - 8MHz 16-bit MCU 32KB Flash 96-seg LCD | TI

MSP430F417IPM - 8MHz 16-bit MCU 32KB Flash 96-seg LCD | TI

MSP430F417IPM ✓ Aktif

Özellik Karşılaştırması

Parametre MSP430F413IPM MSP430F417IPM
Marka Texas Instruments Texas Instruments
Kategori Microcontrollers Microcontrollers
Yaşam Döngüsü Durumu Aktif Aktif
Product Type 16-bit mixed-signal microcontroller —
CPU Architecture MSP430 16-bit RISC —
Azami Saat Hızı 8 MHz 8 MHz
Flash Memory 8 KB —
SRAM 256 bytes 1 KB
Supply Voltage Range 1.8 V to 3.6 V 1.8 V to 3.6 V
Active Current 200 µA at 1 MHz and 2.2 V —
Standby Current 0.7 µA —
Off-Mode Current with RAM Retention 0.1 µA —
Low-Power Modes 5 modes —
Standby Wake-Up Time Less than 6 µs —
LCD Segment Drive Capability 96 segments —
I/O Pin Count 48 pins —
Integrated Comparator 1 comparator —
Timer Resources One or two 16-bit timers depending on family configuration —
Clocking Frequency-Locked Loop (FLL+) —
Paket 64-pin LQFP, 10 mm × 10 mm 64-pin LQFP (PM, 10x10 mm)
Montaj Türü Surface mount Surface Mount
RoHS Durumu Not specified Compliant (Green Package)
REACH Status Not specified —
MSL Seviyesi 3, 260°C, 168 hours —
Core Architecture — MSP430 CPU16 (RISC, 16-bit)
Series — MSP430x4xx
Instruction Cycle Time — 125 ns
Program Memory (Flash) — 32 KB (32K x 8 + 256B)
Active Mode Current (1 MHz, 2.2 V) — 200 µA
Standby Mode Current — 0.7 µA
Off Mode Current (RAM Retention) — 0.1 µA
Wake-Up Time from Standby — < 6 µs
Power-Saving Modes — 5
Clock System — FLL+ (Frequency-Locked Loop)
LCD Driver — 96 segments
Timers — 16-bit Timer_A
Analog Comparator — Yes
Scan Interface (Scan IF) — Yes
GPIO Pins — 48
İşletim Sıcaklığı — -40°C to +85°C (Industrial)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin