NE5532D vs NE5532N Comparaison
Comparaison détaillée côte à côte de NE5532D par Texas Instruments et NE5532N par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ Actif
Comparaison des spécifications
| Paramètre | NE5532D | NE5532N |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $0,00 |
| Amplifier Type | Dual low-noise operational amplifier | General Purpose |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | 9 V/µs |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Plage de température de fonctionnement | 0 °C to +70 °C for NE5532x | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin SOIC | 8-PDIP (0.300 in, 7.62 mm) |
| Type de montage | Surface Mount | — |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | — |
| Manufacturer | Texas Instruments | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Product Type | — | Dual internally compensated operational amplifier |
| Number of Circuits | — | 2 |
| Packaging | — | Tube |
| Gain Bandwidth Product | — | 10 MHz |
| Compensation | — | Internal frequency compensation |
| Noise Performance | — | Low noise |
| Output Drive | — | Improved output-drive capability |
| Small-Signal Bandwidth | — | High small-signal bandwidth |
| Power Bandwidth | — | High power bandwidth |
| Style de montage | — | Through-hole |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |