NE5532D vs NE5532N Comparação
Comparação detalhada lado a lado de NE5532D por Texas Instruments e NE5532N por onsemi. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ Ativo
Comparação de especificações
| Parâmetro | NE5532D | NE5532N |
|---|---|---|
| Marca | Texas Instruments | onsemi |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Unknown |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,00 | $0,00 |
| Amplifier Type | Dual low-noise operational amplifier | General Purpose |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | — |
| Unity-Gain Bandwidth | 10 MHz typical | — |
| DC Voltage Gain | 100 V/mV typical | — |
| Slew Rate | 10 V/μs typical | 9 V/µs |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Faixa de temperatura de operação | 0 °C to +70 °C for NE5532x | [DATA_NEEDED: operating temperature range] |
| Encapsulamento | 8-pin SOIC | 8-PDIP (0.300 in, 7.62 mm) |
| Tipo de montagem | Surface Mount | — |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | — |
| Manufacturer | Texas Instruments | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Corrente de alimentação | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Product Type | — | Dual internally compensated operational amplifier |
| Number of Circuits | — | 2 |
| Packaging | — | Tube |
| Gain Bandwidth Product | — | 10 MHz |
| Compensation | — | Internal frequency compensation |
| Noise Performance | — | Low noise |
| Output Drive | — | Improved output-drive capability |
| Small-Signal Bandwidth | — | High small-signal bandwidth |
| Power Bandwidth | — | High power bandwidth |
| Estilo de montagem | — | Through-hole |
| Tensão de alimentação | — | [DATA_NEEDED: supply voltage] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Output Current | — | [DATA_NEEDED: output current] |