NE5534P vs NE5534NG Comparaison
Comparaison détaillée côte à côte de NE5534P par Texas Instruments et NE5534NG par onsemi. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | NE5534P | NE5534NG |
|---|---|---|
| Marque | Texas Instruments | onsemi |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Amplifier Type | Single operational amplifier | Single operational amplifier |
| Tension d'alimentation | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | [DATA_NEEDED: unity-gain bandwidth] |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | — |
| Slew Rate | 13 V/µs typical | [DATA_NEEDED: slew rate] |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| DC Voltage Gain | 100 V/V typical | — |
| Output Voltage Swing | 32 V peak-to-peak typical with VCC = ±18 V and RL = 600 Ω | — |
| Number of Amplifiers | 1 | — |
| Boîtier | 8-pin PDIP | — |
| Type de montage | Through-hole | Through-hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| Courant de repos | [DATA_NEEDED: quiescent current] | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | not_applicable |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| Conflict Minerals Status | unknown | — |
| Number of Circuits per Package | — | 1 circuit |
| Supply Voltage Range | — | 3 V to 20 V |
| Package Type | — | 8-PDIP |
| Product Category | — | Instrumentation, op amp, buffer amplifier |
| Operating Grade | — | Commercial temperature grade |
| Input Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Input Noise Current Density | — | [DATA_NEEDED: input noise current density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current per amplifier] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |