NE5534P vs NE5534NG 比較
詳細並排比較 NE5534P 由 Texas Instruments 與 NE5534NG 由 onsemi. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | NE5534P | NE5534NG |
|---|---|---|
| 品牌 | Texas Instruments | onsemi |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | Unknown |
| Amplifier Type | Single operational amplifier | Single operational amplifier |
| 供應電壓 | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | [DATA_NEEDED: unity-gain bandwidth] |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | — |
| Slew Rate | 13 V/µs typical | [DATA_NEEDED: slew rate] |
| Common-Mode Rejection Ratio | 100 dB typical | — |
| DC Voltage Gain | 100 V/V typical | — |
| Output Voltage Swing | 32 V peak-to-peak typical with VCC = ±18 V and RL = 600 Ω | — |
| Number of Amplifiers | 1 | — |
| 封裝 | 8-pin PDIP | — |
| 安裝類型 | Through-hole | Through-hole |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| 靜態電流 | [DATA_NEEDED: quiescent current] | — |
| RoHS 狀態 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | not_applicable |
| Lead-Free Status | unknown | — |
| Halogen-Free Status | unknown | — |
| Conflict Minerals Status | unknown | — |
| Number of Circuits per Package | — | 1 circuit |
| Supply Voltage Range | — | 3 V to 20 V |
| Package Type | — | 8-PDIP |
| Product Category | — | Instrumentation, op amp, buffer amplifier |
| Operating Grade | — | Commercial temperature grade |
| Input Noise Voltage Density | — | [DATA_NEEDED: input noise voltage density] |
| Input Noise Current Density | — | [DATA_NEEDED: input noise current density] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| Supply Current per Amplifier | — | [DATA_NEEDED: supply current per amplifier] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |