OPA132U vs OPA137U Comparaison
Comparaison détaillée côte à côte de OPA132U par Texas Instruments et OPA137U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
OPA132U - 8MHz FET-Input Op Amp, Single, 8-SOIC | Texas Instruments
OPA132U ✓ ActifComparaison des spécifications
| Paramètre | OPA132U | OPA137U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Amplifier Type | FET-Input Operational Amplifier | Single voltage-feedback operational amplifier |
| Number of Channels | 1 (Single) | — |
| Gain Bandwidth Product | 8 MHz | — |
| Slew Rate | 20 V/µs | 3.5 V/µs |
| Input Bias Current (max) | 50 pA | — |
| Input Offset Voltage (max) | 500 µV | — |
| Open-Loop Gain (600 Ω load) | 130 dB | — |
| Total Harmonic Distortion | 0.00008 % | — |
| Supply Voltage Range (Dual) | ±2.25 V to ±18 V | — |
| Supply Voltage Range (Single) | 4.5 V to 36 V | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Type de sortie | Rail-to-Rail (approaching rails on 600 Ω) | — |
| Boîtier | 8-pin SOIC (D) | 8-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Series | SoundPlus, OPAx132 | — |
| Input Architecture | — | JFET input |
| Maximum Supply Voltage | — | 36 V |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Bias Current | — | ±10 pA |
| Courant de repos | — | 120 µA per channel |
| Open-Loop Gain | — | 145 dB |
| Input Common-Mode Range | — | Rail-to-rail input to V+ |
| Channel Count | — | 1 channel |
| Supply Voltage Range | — | [DATA_NEEDED: minimum and maximum operating supply voltage] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Short-Circuit Current | — | [DATA_NEEDED: output short-circuit current] |